• 繁體中文
  • 產品介紹
    若您有任何詢問?請與我們聯繫,我們會盡快與您連絡。
    Home > Products Index > Conveying & Handing > Main Equipments of Central Material Conveying System

    Main Equipments of Central Material Conveying System

    中央供料系統 - 快速選料站

    Main Equipments of Central Material Conveying System

    • Each inlet is installed with steel quick-release connector and anti-dust cover for fast material selection. Manifolds not in use remain sealed to prevent dust contamination
    • Composed of several manifolds (1.5"~2") and 2~8 inlets; each manifold may connect to multiple injection molders that handle identical material
    • Works with central PC and material shutoff valve to prevent improper selection, vacuum

    中央供料系統 - 集合式多站料筒

    Main Equipments of Central Material Conveying System

    • Designed for integrated management; uni-body unit, appealing.
    • May connect to multiple dehumidifying/drying systems.
    • Optional items: 1. Precision HEPA filter. / 2. Neodymium or oxidized magnet base. / 3. Stainless-steel vacuum box with shutoff valve. / 4. Storage tank.

    中央供料系統 - 中央供料控制主機

    Main Equipments of Central Material Conveying System

    • Two main units easily set to work alternate weeks to extend durability.
    • Parallel-linked with auto-switching valve: one works in case the other breaks down to ensure continuous, normal operation of central in-feed system.
    • Automatic relief valve for motor-overpressure protection.
    • Non-stop motor to minimize wear due to frequent ON/OFF and save energy.

    中央供料系統 - 脈衝高效能過濾機

    Main Equipments of Central Material Conveying System

    • Fully-steel, appealing, and easy to clean.
    • High-pressure air accumulator releases air when pre-set in-feed frequencies are reached, then massive air pulses force dust into detachable collector.
    • Handle-type check valve allows cleaning of dust collector without shutting off machine.
    • Relief valve releases high-pressure air during pulsation reverse-washing to prevent dust from scattering.
    • Vacuum-break diaphragm valve effectively protects high-pressure wind mill and speeds up material conveyance.

    中央供料系統 - 不銹鋼斷料閥式吸料機

    Main Equipments of Central Material Conveying System

    • Fully-steel, extra-durable.
    • Installed at bottom of dried-material storage or material tank to control material-collection time, and works via extended vacuuming to thoroughly clean piping to prevent:
      1. Re-humidifying of material inside pipe.
      2. Deformation of steel-wire-braided hose due to prolonged contact with hot, dried plastic residue.
      3. Difficulty in vacuuming due to pipe clogging which affects in-feed.

    中央供料系統 - 不銹鋼貯料筒

    Main Equipments of Central Material Conveying System

    • Fully-steel unit with barrel tie for easy cleaning, with barrel height and capacity adjustability.
    • Designed for automatic and manual material loading.
    • Low-level sensor optional to warn of material shortage.
    • Display window and vacuum box with pipe-purge valve optional.
    • High-precision HEPA filter optional for the optical and cosmetic industries.
    • Container support and hanger bracket also optional.

    中央供料系統 - Stainless Compression Coupling

    Main Equipments of Central Material Conveying System

    • Fully-steel, sturdy, durable 6″-long coupling with rubber sleeve to ensure excellent air-tightness
    • Brass ground to prevent dust from adhering to plastic pellets due to static-electricity
    • Model Model Inner Diameter Pcs No. of b
      SC-1.5 1.5" 38.1mm 3
      SC-2.0 2.0" 50.8mm 3
      SC-2.5 2.5" 63.5mm 3
      Separate control box and temperature controller. Excellent electrical component lifeMade For Your Needs

    A-MAX SCIENCE CORP
    T: +886-4-22778819 / F: +886-4-22776898 / info@a1-max.com.tw
    關於A-MAX 產品介紹 A-MAX新聞 線上型錄