• 繁體中文
  • 產品介紹
    若您有任何詢問?請與我們聯繫,我們會盡快與您連絡。
    Home > Products Index > Dehumidifying Dryer > THREE-IN-ONE Dehumidifying Dryer > RD Series
    Dehumidifying Dryer : RD系列

    Dehumidifying Dryer

    RID

    功能特點
    規格表


    Features


    • Equipped with Auto loaders
    • Dew temperature has reached -40ºC, and the dew temperature curve remains stable.
    • Intelligent microcomputer control system + PID temperature control.
    • Filter cooler and regenerative heater use stainless steel SUS 304.
    • Lack in reverse, abnormal operation, motor overload, and renewable over-temperature protection devices.
    • Cooler is of SUS 304 detachable design, is easy to clean up in dehumidification of oiled plastic.
    • The secondary side feeding suction inlet supplies the dehumidification network to effectively prevent outside air from entering to create resurgence.
    • The dryer is of blowing insulation design, energy saving and can ensure that the plastic is first-come-first-go to prevent uneven drying.
    • SUS 304 stainless steel thermal dryer door is designed on the front of the barrel for easy cleanup.
    • 3-in-1 design: the dehumidifying dryer is composed of dehumidifier, heat drying machine, 1-2 material suction machine to save space.
    • High-quality honeycomb ceramic runner imported from Japan that will produce no powder after long time running to keep cleanness.
    • After drying, coupled with the broken material suction feeding box, the materials in the suction tube are removed after each suction to avoid accumulation and prevent the resurgence of plastic.


      Option


      ▲ Dew point hygrometer ▲ RS485 communications interface ▲ Hydro tracer for plastics
      ▲ HEPA filter ▲ TIMER

    Specifications
  • Detailed specifications >>

  • Air Flow Rate
    Air flow
    Drying blower 60 HZ
    50 HZ
    Regenerative blower 60 HZ
    50 HZ
    Heater capacity Drying
    Regenerative
    Hopper dryer cap
    Auto loaders 60 HZ
    50 HZ
    Material vacuum receiver Primary
    Secondary
    Connection piping Vacuum air
    Material inlet
    Compressed air
    Drying air
    Regenerative air outlet
    Cooling water piping
    Total load 60 HZ
    50 HZ
    Dimension
    Approx. Weight
    Cubic
    Meter/ Hr
    RD-50-3 RD-100-3 RD-200-3 RD-300-3 RD-400-3 RD-700-3 RD-1000-3
    CMH 50 100 200 300 400 700 1000
    KW 0.5 0.85 1.9 2.6 3.7 8.6 11
    0.4 0.75 1.75 2.2 3.4 7.5 9.0
    KW 0.2 0.2 0.5 0.85 0.85 2.6 3.7
    0.18 0.18 0.4 0.75 0.75 2.2 3.4
    KW 3 6 10 15 15 25 30
    KW 3 4.5 6 10 10 15 22
    kg 50 100 200 300 400 800 1000
    KW 0.85 1.10 1.10 1.90 1.90 2.60 2.60
    0.75 0.90 0.90 1.75 1.75 2.20 2.20
    LT 6 6 6 15 15 15 15
     LT 6 6 6 15 15 15+5BT 15+5BT
    INCH 2 2 2 2 2 2 2
    INCH 1.5 1.5 1.5 1.5 2 2 2
    mm ø 5 x 8 at 4kg/cm2
    INCH 1.5 2.5 2.5 3 3.5 4.5 6.5
    INCH 1.5 2 2 2 2.5 3 3.5
    INCH 3/8 3/8 1/2 3/4 3/4 1 1 1/4
    KW 7.55 12.65 19.50 30.35 31.45 53.80 69.30
    7.33 12.33 19.05 29.70 30.90 51.90 66.60
    W x D x H mm 55 x 80 x 146 55 x 80 x 146 55 x 100 x 146 75 x 115 x 176 75 x 115 x 176 115 x 150 x 206 120 x 150 x 223
    Kg 260 335 430 465 540 960 1135

    ※We reserve the right to change specifications without prior notice.


    A-MAX SCIENCE CORP
    T: +886-4-22778819 / F: +886-4-22776898 / info@a1-max.com.tw
    首頁 連絡A-MAX 網站地圖 關於A-MAX 產品介紹 A-MAX新聞 線上型錄